Short answer
Choose a wood lathe by the largest diameter you turn repeatedly and the floor space you can give it. Among EXMAC lathes, the EL16 is the 16" model, and the EL20 is the 20" model for larger bowls and platters, at 616 lb net. Confirm the EL16's weight with EXMAC before planning delivery.
Key points
- Sort your work into spindles, bowls, and hollow forms, then note the largest blank you expect to repeat.
- Both models have a sliding, rotating headstock and a movable magnetic control panel.
- The EL20 weighs 616 lb net, which affects delivery, placement, and any future move.
- Budget for turning tools and workholding as well as the lathe.
What should you look for in a wood lathe?
A wood lathe spins the workpiece while you shape it with a handheld tool. Spindle turning runs along the grain between centers, as in handles and table legs. Bowl turning usually mounts the blank on a faceplate or chuck.
Swing and length between centers
Swing is the largest diameter a lathe can turn over its bed, and the number in each EXMAC lathe's name refers to it. Length between centers is the longest piece it can hold. Usable length depends on how you hold the work, because a live center, faceplate, chuck, or extension bed can each change it. Ask EXMAC to confirm the figure for your setup.
Headstock
Both EXMAC lathes have a sliding, rotating headstock. Moving it changes your access to the work and adds flexibility for bowl turning and outboard setups. If you plan to turn outboard, sketch the complete setup, because it needs more clear space than the standard footprint.
Speed and controls
Both models have a movable magnetic control panel with a forward/reverse switch and a dual RPM readout, so you can place the controls within reach. Reverse can help when sanding, but only if the chuck or faceplate is locked to the spindle as the manual directs, because a threaded mount can unscrew in reverse. The EL16 has inverter-controlled variable speed. Ask EXMAC for speed ranges.
Indexing, braking, and accessories
Indexing lets you lay out evenly spaced positions for fluting and segmenting. Dual braking modes offer separate settings for small and large workpieces. Each model also has its own accessories, including extension beds, center steadies, and ER25 quills, so check the listing for your lathe.
EL16 vs. EL20: what is the difference?
| Feature | EL16 | EL20 |
|---|---|---|
| Swing | 16" | 20" |
| Intended work | Spindle work and bowls within its swing | Larger bowls and platters |
| Construction | Cast iron | Cast iron |
| Net weight | Ask EXMAC | 616 lb |
| Price | $3,099.99 | $4,299.99 |
Both models have a sliding, rotating headstock, indexing, a movable control panel, forward/reverse, and dual braking modes. Prices are from the product pages at the time of this update. See the EL16 and EL20 pages for current price and availability.
Which EXMAC lathe fits your projects?
For the largest project you expect to repeat, write down the diameter, the blank length, the starting weight, and how you will hold it. A single ambitious blank should not decide the machine, but a large setup you keep coming back to should.
Compare current EL16 and EL20 pricing on the product pages. It makes sense if your regular blanks need the larger swing. Before you decide, plan the delivery path for the machine you choose. If you expect to turn longer work, look at the extension bed listed for each lathe, and ask EXMAC what ships with the machine.
What should you check before you buy a wood lathe?
- Space: plan a level, stable spot with clear access at the headstock, tailstock, and controls. Allow room to load a blank and move the tool rest.
- Power: before you order, ask EXMAC for the required voltage and circuit, and have a qualified electrician confirm your shop can supply it.
- Dust and chips: turning throws chips and fine dust in different directions. Place collection close to the cut without restricting your tools.
- Delivery: EXMAC ships within the United States only. Larger machines ship by freight and may need a delivery appointment, liftgate service, or unloading help, with possible carrier charges. Inspect the crate before you sign. See Shipping & Delivery.
- Moving: plan how the machine will get from the curb to its final spot, and who will help.
- Workholding: decide how you will hold your typical blank, and check that the accessories you need are listed for your model.
How do you use a wood lathe safely?
Safety
- Read the complete manual before assembly or operation. You can download the EL16 and EL20 manuals.
- Inspect and secure the blank, and turn it by hand before you start.
- Check the speed setting before you switch on, and start large or unbalanced blanks at the lowest speed.
- Wear a face shield and dust protection, avoid loose clothing, and stand clear of the line of rotation at startup.
- Disconnect power before adjustment or service. Get hands-on training if you are new to turning.
Frequently asked questions
What does swing mean on a wood lathe?
Swing is the largest diameter a lathe can turn over its bed. The EL16 is the 16" model and the EL20 is the 20" model.
Should I buy the EL16 or the EL20 for bowls?
Both can turn bowls. The EL20 is intended for larger bowls and platters. Base the choice on the largest blank you plan to turn repeatedly and the floor space you have.
How heavy is the EL20?
The EL20 weighs 616 lb net. Plan delivery, placement, and any future move around that weight.
What does a sliding, rotating headstock do?
It lets you move and turn the headstock to change your access to the work, which adds flexibility for bowl turning and outboard setups.
What warranty comes with an EXMAC lathe?
EXMAC machines come with a 2-year limited warranty. An optional 3-year extension can be added only when you buy the machine. See the Warranty page for the terms.
Are accessories interchangeable between the two lathes?
Do not assume so. Most EXMAC lathe accessories are listed for a specific model, so check the listing, or ask EXMAC with your model number.
What should you do next?
- See the EL16The 16" woodturning lathe
- See the EL20The 20" woodturning lathe
- Compare machinesBoth models side by side
- Lathe accessoriesBeds, steadies, and quills
- Manuals & downloadsDownload the EL16 and EL20 manuals
- Ask EXMACQuestions before you order
Not sure a lathe is the right first machine? Read which woodworking machine to buy first, or see how to choose a scroll saw and choose a bandsaw.
Written by the EXMAC Product Support Team. EXMAC machines are made in Taiwan and sold and supported in the U.S. Model details come from EXMAC product pages. Project suggestions are general guidance, so confirm your setup with EXMAC before you order.


